Countersink Bit

POCKET HOLE JIG KIT  (PATENT) WF-MP2HK Material:  Drill: HSS steel,  Bit :S2 ,  Screws : steel High quality  Origin: TAIWAN Packing:Black P.P Box + clear cover + sleeve card, 20set/CTN/15.2kg/18kg/1.8' Contents: Twin holes jig 3/8” Hss Step Drill Bit Square Driver 150mm Bit No.2 Robertson Depth Stop Collar Allen Wrench 10pcs-#7×1” Coarse Square Driver Screws with Pan-Head 10pcs-#8×1-1/4” Coarse Square Driver Screws with Washer-Head 10pcs-#8×1-1/2” Coarse Square Driver Screws with Washer-Head 10pcs-#8×2” Coarse Square Driver Screws with Washer-Head 10pcs-#8×2-1/2” Coarse Square Driver Screws with Washer-Head Description: Pocket hole jig system of Twin holes High hardened plastic body parts High hardened metal drill guide Easy to use and quickly remove for install Adjust for wood materials from 1/2” to 1-1/2” Top side magnetic of steel C clamp Easy to set drill depth and tighten Pocket hole joinery is a way of making strong,hidden joints by drilling a hole at an angle of 15 degrees. These joints are fast and easy to produce. Simply drill a hole a into one work piece, then join it to a second work piece with a self-tapping screw. Because the screws act as an internal clamp holding the joint together, glue is unnecessary (but usually recommended ) for most common joints. Compared to the traditional joinery methods of dowel or mortise and tenon joints, pocket hole joints;Require only one hole to be drilled, eliminating the need to precisely line up mating work pieces. Do not require any complex mathematics or measurements. Because pocket-hole joinery doesn’t require access to the inside of the joint,quick repairs are possible without completely disassembling the joint. Fixing a squeaky chair or strengthening furniture requires only the drilling of additional pocket holes, and the use of screws to pull the two pieces together.

HSS TWIST DRILL BIT WHTD-1 Material:  HSS 4241 , M2 , M35 Size : A: Shank 6.35mm impact , Diameter:1.0~13.0mm , L:30~82mm       B: Round shank , Diameter:1.0~13.0mm , L:12~101mm Head:118°~135° High quality  Origin: TAIWAN Packing: slider card, 12pcs/Box,120pcs/CTN/13kg/14kg/1.2' Description: Apply to wood & steel construction Suitable for wood 、metal、cooper,and stainless steel Eject chips easily, speed up drilling and increase durability Fast drilling in every material with a beautiful hole Other spec available by request

MASONRY REBAR CUTTER WMRC-1 Material: Tungsten steel  Diameter:10/13/16/19/22/25/28mm (other diameter available by request)       O/L: 305mm       F/L:84mm Coating: Sandblasting Shank: SDS Plus High quality (special design for professionals) Origin: TAIWAN Packing: slider card, 12pcs/Box,120pcs/CTN/14kg/15kg/1.3'  Description: Powerful cutting: Cut through rebars fast and effortless Excellent welding: prevent falling/broken tooth Efficient chip ejection: Ejection holes and well- designed flute

HOLE SAW WHS-1 Material: Tungsten carbide, Alloy steel  Size:  Tungsten carbide hole saw:  Diameter:54/60/80/100mm, Depth:40mm,O/A:100mm Alloy steel hole saw: Diameter:54/60/80/100mm, Depth:40mm,O/A:100mm High quality Origin: TAIWAN Packing: slider card, 12pcs/Box,120pcs/CTN/16kg/17kg/1.4'  Description: Dual cutting edge pilot drill, fast drilling ,prevent accumulating chips  Sharp tungsten teeth, faster drilling,50% more efficient than flat type Tungsten carbide hole saw- Application: Door lock, table line hole, drain or A/C hole, downlight Material: Hardest wood door, plastic door, hardness fire resistant building material, concrete fiberboard, plasterboard, calcium silicate board. Alloy steel hole saw- Application: Door lock, table line hole.  

TWIST TYPE ADJUSTABLE HOLE CUTTER WTAH-1 Material: TCT Blade/ Alloy Blade Size : 40mm-200mm  Adjustable cutting rang High quality Origin: TAIWAN Packing: slider card, 12pcs/Box,120pcs/CTN/15kg/16kg/1.3' Description: Replaceable blade & drill  TCT blade/ TCT center drill for ceramic siding/FDR/wood  Ally blade /HSS center drill for hardwood/ structural plywood Shank option: Straight / 6.35 impact /SDS plus  

TAP DRILL BIT SET WTDB-01 Material: M2, Surface treatment & Matel finish , Body: Shank 6.35mm Size: OL:55mm - M3×0.5mm, M4×0.7mm, M5×0.8mm, M6×1.0mm, 6-32NC,8-32NC           10-24NC, 10-32NC OL:60mm - M8×1.25mm, M10×0.5mm, 12-24NC,1/4”-20NC, 1/4”Bit Holder w/magnet High quality Origin: TAIWAN Packing: Plastic Box+ color box + shrink 25sets/Box,50set/CTN/15kg/16kg/ 0.87'  Description: Drilling, tapping, and deburring-three processes are solved one time. Effectively improve work efficiency, no need to replace accessories. Suitable for common metals such as aluminum , brass copper etc.